Kyocera KM-6030, Руководство по обслуживанию

Страница: 222 / 463

2FB/2FC-4
1-5-59
(10)
The feed motor does
not operate. 1. Poor contact in the feed
motor connector termi-
nals.
Reinsert the connector. Also check for continuity within the con-
nector cable. If none, remedy or replace the cable.
2. Broken feed motor gear. Check visually and replace the feed motor C if necessary.
3. Defective engine PWB. Run maintenance item U030 and check if YC2-B7 on the engine
PWB goes low. If not, replace the engine PWB.
4. Defective feed motor. Run maintenance item U030 and check if the feed motor oper-
ates. If not, replace the feed motor.
5. Defective duplex PWB. Run maintenance item U030 and check if the feed motor oper-
ates. If not, replace the duplex PWB.
(11)
The MP feed motor
does not operate. 1. Poor contact in the MP
feed motor connector ter-
minals.
Reinsert the connector. Also check for continuity within the con-
nector cable. If none, remedy or replace the cable.
2. Broken MP feed motor
gear.
Check visually and replace the MP feed motor if necessary.
3. Defective engine PWB. Run maintenance item U030 and check if YC3-B8 on the engine
PWB goes low. If not, replace the engine PWB.
4. Defective MP feed motor. Run maintenance item U030 and check if the MP feed motor
operates. If not, replace the MP feed motor.
5. Defective deck PWB. Run maintenance item U030 and check if the MP feed motor
operates. If not, replace the deck PWB.
(12)
The vertical feed
motor does not oper-
ate. 1. Poor contact in the verti-
cal feed motor connector
terminals.
Reinsert the connector. Also check for continuity within the con-
nector cable. If none, remedy or replace the cable.
2. Broken vertical feed
motor gear.
Check visually and replace the vertical feed motor if necessary.
3. Defective vertical feed
motor.
Run maintenance item U030 and check if the vertical feed motor
operates. If not, replace the vertical feed motor.
4. Defective cassette PWB. Run maintenance item U030 and check if the vertical feed motor
operates. If not, replace the cassette PWB.
(13)
The registration
motor does not oper-
ate. 1. Poor contact in the regis-
tration motor connector
terminals.
Reinsert the connector. Also check for continuity within the con-
nector cable. If none, remedy or replace the cable.
2. Broken registration motor
gear.
Check visually and replace the registration motor if necessary.
3. Defective engine PWB. Run maintenance item U030 and check if YC2-B3 on the engine
PWB goes low. If not, replace the engine PWB.
4. Defective registration
motor.
Run maintenance item U030 and check if the registration motor
operates. If not, replace the registration motor.
5. Defective duplex PWB. Run maintenance item U030 and check if the registration motor
operates. If not, replace the duplex PWB.
Problem Causes Check procedures/corrective measures