Kyocera FS-680, Руководство пользователя

Страница: 7 / 141

Introduction
vi
Interface connectors
Important note on the interface connectors
Be sure to turn off printer power before connecting or disconnecting an interface cable* to the printer. For protection against
static discharge which may be applied to the printer’s internal electronics through the interface connector(s), keep any
interface connector which is not in use capped using the protective cap supplied.
* Use shielded interface cable.
Safety information
Laser safety
This printer is certified as a Class 1 laser product under the U.S. Department of Health and Human Services (DHHS) Radiation
Performance Standard according to Radiation Control for Health and Safety Act of 1968. This means that the printer does not
produce hazardous laser radiation. Since radiation emitted inside the printer is completely confined within protective housings
and external covers, the laser beam cannot escape from the printer during any phase of user operation.
Laser notice
This printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR Subchapter for Class I (1) laser products,
and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 825.