manualshive.com logo in svg

Kyocera FS-680, Руководство пользователя

Поделиться
Скачать
Kyocera FS-680 Скачать руководство пользователя страница 25

Environmental Requirements of the Page Printer

1- 6

Basic handling precautions

Removing or changing parts other than disposable parts is prohibited.  For repairs, contact the

Kyocera dealer from which you purchased the printer.

When moving the printer to a new location, contact the Kyocera dealer from which you purchased the

printer.

Using this printer to print currency or negotiable bonds is in violation of the law.

Unpacking and Inspection

Remove the printer from the package according to the steps given below. After removing the printer,

check that nothing is missing against the list of packaged contents.

1.

Place the box containing the printer on a flat, stable surface.

2.

 Remove 

the 

User’s

 Manual, Toner Kit and other items located on top of the spacer and remove 

the spacer.

3.

  Carefully remove the printer.

Содержание FS-680














































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды