Kyocera FS-3750 - B/W Laser Printer, Руководство по установке

Страница: 37 / 43

5. Memory Expansion Installation
18
5. Memory Expansion Installation
In this section is explained how to expand the printer's memory. Expanded printer memory
enables you to print more complex pages, download more fonts, and define more macros.
It begins by explaining how to remove the main circuit board from the printer, and explains
how to install a SIMM (single in-line memory module) on the main circuit board.
The FS-1750 comes supplied with 8 MB of memory installed, and likewise the FS-3750
comes with 16 MB of memory supplied. Two slots are provided for expanding the memory
in your printer so that more complex printing can be done, as well as increasing the printing
speed. By installing optional memory cards into your printer, the memory in the FS-1750
can be increased to a maximum of 72 MB, and the FS-3750 can be increased to a maximum
of 64 MB.
☛
‹
A 16 MB SIMM is installed in one of the SIMM sockets in the FS-3750, so in order
to increase the memory to the maximum 64 MB this SIMM must be changed.
‹
The expansion memory should be installed only by a Kyocera authorized dealer
or Kyocera certified technician. Kyocera shall not be liable for damage due to
improper installation of the expansion memory.
The minimum memory requirements for the printer with various options installed are
listed in the table below. Please refer to this table when expanding the printer's memory.
Printing condition
Resolution
300 dpi 600 dpi
1200 dpi
Fast mode Fine mode
PCL 6, duplex mode = None 8 MB 8 MB 8 MB 8 MB
PCL 6, duplex mode = On 8 MB 8 MB 8 MB 12 MB
KPDL, duplex mode = None 8 MB 8 MB 8 MB 8 MB
KPDL, duplex mode = On 8 MB 8 MB 12 MB 12 MB
PCL 6/KPDL resource protection,
duplex mode = None
– 10 MB 10 MB 10 MB
PCL 6/KPDL, resource protection,
duplex mode = On
– 14 MB 14 MB 14 MB