Kyocera ECOSYS FS-3540MFP, Руководство по эксплуатации

Страница: 61 / 352

2-21
Preparation before Use > COMMAND CENTER (Settings for E-mail)
COMMAND CENTER (Settings for E-mail)
COMMAND CENTER is a tool used for tasks such as verifying the operating status of the machine and changing the
settings for security, network printing, E-mail transmission and advanced networking.
1
Display the screen.
1
Launch your Web browser.
2
In the Address or Location bar, enter the machine’s IP address.
E.g.) http://192.168.48.21/
The web page displays basic information about the machine and COMMAND CENTER as
well as their current status.
2
Configure the function.
Select a category from the navigation bar on the left of the screen. The values for each
category must be set separately.
If restrictions have been set for COMMAND CENTER, enter a password to access pages
other than the startup page. The default password is “admin00”. The password can be
changed.
For details, refer to the KYOCERA COMMAND CENTER Operation Guide .
NOTE
Here, information on the FAX settings has been omitted. For more information on using the
FAX, refer to the
FAX Operation Guide .
FAX functions are available only on products with the fax function installed.