Kyocera Copystar CS-1635, Руководство по обслуживанию

Страница: 208 / 244

2HA/2HB
2-4-6
Periodic maintenance procedures
Section
Maintenance
part/location
Method Maintenance cycle Points and cautions Page
Test copy
and test print Perform at the maxi-
mum copy size Test copy Every service
Section
Maintenance
part/location
Method Maintenance cycle Points and cautions Page
Paper feed
section Paper feed pulley Check or replace - Clean with the alcohol. P.1-5-5
Separation pulley Check or replace - Clean with the alcohol. P.1-5-3
Forwarding pulley Check or replace - Clean with the alcohol. P.1-5-5
MP paper feed pulley Clean or replace Every 150,000 counts Clean with the alcohol. P.1-5-9
MP separation pad Check or replace - Clean with the alcohol. P.1-5-9
Left registration roller Clean or replace Every 150,000 counts Clean with alcohol or a dry cloth. P.1-5-11
Right registration roller Clean Every 150,000 counts Clean with alcohol or a dry cloth.
Registration cleaner Clean or replace Every 150,000 counts Vacuum. P.1-5-11
Section
Maintenance
part/location
Method Maintenance cycle Points and cautions Page
Optical
section Slit glass Clean Every 150,000 counts Clean with a dry cloth.
Contact glass Clean Every 150,000 counts Clean with alcohol and then a
dry cloth.
Mirror 1 Clean - Clean with a wet cloth and then
a dry cloth only if vertical black
lines appear on the copy image.
Mirror 2 and mirror 3 Clean - Clean with a wet cloth and then
a dry cloth only if vertical black
lines appear on the copy image.
Lens Clean - Clean with a dry cloth only if
vertical black lines appear on
the copy image.
Reflector Clean - Clean with a dry cloth only if
vertical black lines appear on
the copy image.
Exposure lamp Check or replace - Replace if an image problem
occurs or after the exposure
lamp does not turn on. P.1-5-12
Optical rail Check or grease - Check noise and shifting and
then apply scanner rail grease
EM-50L.
Original size detection
sensor Check or clean - Clean with alcohol or a dry cloth.
Laser scanner unit Check or clean Every 150,000 counts Clean the slit glass with alcohol.
Section
Maintenance
part/location
Method Maintenance cycle Points and cautions Page
Transfer and
separation
section Transfer roller Clean Every 150,000 counts Vacuum or clean with a dry cloth. P.1-5-27
Separation electrode Check or clean - Clean with the equipped brush.