Kyocera Mita Ecosys FS-1010, Руководство по обслуживанию

Страница: 120 / 172

6-8
FS-1010
Indicator Remote Operation Panel display Description
The specified file is not found. Press the
Go key to resume printing. You can
abandon printing by pressing the Cancel
key.
Current print processing cannot
continue.
Press the Go key to resume printing.
You can abandon printing by pressing
the Cancel key.
An error has occurred during access to
the memory card using the
PRESCRIBE RWER command or from
the Remote Operation Panel utility.
Look at the error code given in place of
##
and refer to the corresponding
description given below.
04
: The capacity of the memory card is
insufficient. Clean up files.
05
: Specified file not on memory card.
06 : No memory for use by memory
card. Expand printer memory.
Press the Go key to resume printing.
You can abandon printing by pressing
the Cancel key.
Printing cannot continue because there
is not enough memory.
Try adding more memory. Press the Go
key to resume printing.
You can abandon printing by pressing
the Cancel key.
Indicator Remote Operation Panel display Description
The printer’s memory is running low
because of the number of downloaded
fonts and macros.
Print a status page to see how much user
memory is left and try deleting
unnecessary fonts and macros.
The waste toner reservoir is almost full.
The waste toner reservoir will become
full and the printer will stop printing.
Warning
low memory
Warning waste
toner box
(No
indication
patterns
available)
File not found
Press GO
KPDL Error
Press GO
MemoryCard err##
Press GO
Memory overflow
Press GO
Error messages