manualshive.com logo in svg

Kyocera Mita DP-2800, Инструкция по эксплуатации

Поделиться
Скачать
Kyocera Mita DP-2800 Скачать руководство пользователя страница 51

Chapter 1  Safeguards and installing the Page Printer

1-

 

30

13. Install the printer driver.

A CD-ROM containing a printer driver for Windows (Windows 3.1, Windows 95/98 and Windows NT
3.51/4.0) is supplied with this printer.  Once this printer driver is installed on the computer, it is
possible to make various settings for this printer from within Windows applications.  It is also possible
to control options and printing from within Windows.

For each of these operating systems, the printer driver is located in the folder on the CD-ROM.  The
steps for installing this driver are given below.  Read this in conjunction with the manual supplied with
Windows.

For details on how to install the printer driver under Windows NT, read the file README.TXT in the
CD-ROM's root directory.

Installing Under Windows 95/Windows 98

1.

Insert the supplied CD-ROM into the CD-ROM drive of the computer.

2.

Click on “Start” with the mouse on the Windows95/98 Task Bar, and align the cursor with 
“Settings.” Click on “Printers” among the items displayed.

Windows 95

Windows 98

Start Button

Содержание DP-2800


























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды