manualshive.com logo in svg

Kyocera Mita DP-2800, Инструкция по эксплуатации

Поделиться
Скачать
Kyocera Mita DP-2800 Скачать руководство пользователя страница 186

Chapter 5  Troubleshooting

5-22

Indicator

Meaning of Indicator

Corresponding Printer Location

A

Check the optional paper feeder
(EF-100 or UF-100).
(Only when installed)

When a paper jam occurs in the optional feeder, pull it out
carefully.  (For details, read the instruction manual for each
separate option.)

B

Check the multi-purpose tray.

When a paper jam occurs in the multi-purpose tray, first
completely remove all jammed paper and then open and close
the front cover.

C, D, E

Check the optional paper feeder
(ST-1000).
(D and E are only displayed when
an optional ST-1000 is installed.)

Open the side cover of the paper feeder indicated and remove
the jammed paper.  (See Figure 5.1.)

F

Check the optional unit (F-8118,
AS-M8111, or F-8130).
(Only when installed)

Remove the paper jammed in the paper stacker.
(For details, read the paper stacker instruction manual.)

Check the face-up output tray.

If printing stops before a page is completely output, carefully
remove that sheet of paper.  (See Figure 5.2.)

Check the face-down output tray.

If printing stops before a page is completely output, carefully
remove that sheet of paper.

H

Check the paper feed unit.

Open the front cover and carefully pull out the paper feed unit as
far as it will go.  If paper is jammed in the registration rollers,
remove it by the easiest means possible. (See Figure 5.3.) Pull
jammed paper out of the fuser unit in the same manner.  (See
Figure 5.4.)
After all paper has been completely removed, return the paper
feed unit.

Check the fuser unit.

Open the front cover and carefully pull out the paper feed unit as
far as it will go.  Open the fuser unit cover (grasp the tab
[green]) and check inside the fuser unit.  Jammed paper may
sometimes be left inside the fuser unit.  (See Figure 5.5.)

I

Check the optional duplex printing
unit (AD-31).
(Only when installed)

Open the front cover, pull out the duplex printing unit and
remove the jammed paper.  (For details, read the duplex printing
unit instruction manual.)

1 — 6

Check the cassette indicated.

Pull out the cassette indicated and remove the jammed paper.
After all paper has been completely removed, open and close
the front cover.

G

Содержание DP-2800


























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды