background image

10. Kwun Limited warranty policy

10.13 Kwun Three packs of limited warranty/ 

Pay for repairs and related

※ In view of the differences between Kwun’s versions, Kwun does not support global co-guarantee, and can only provide warranty service in the designated regional 
repair center of the Kwunphi. If you need to designate a repair center in the non-purchase area, the Kwunphi will be handled according to the local stock situation and 
only provide a paid service.
※ If the address you provide is wrong or the recipient refuses to accept, the customer shall bear the loss caused thereby.
※ If the express cannot be delivered or returned to the bug after being rejected, the bug will take care of it and the storage fee will be calculated from the date of return. 
Due to the corresponding requirements of the storage environment, the storage charge standard is: 100 yuan/day. When the storage charge is equivalent to the residual 
value of Kwun, the Kwunphi will have the right to dispose of the Kwun. (Kwun Residual value calculation method: residual value = original selling price - this maintenance 
cost)
※ If you wish to send Kwun overseas, you need to obtain the approval of the worm, and the resulting customs duties and customs clearance costs should be borne by 
you.
※ If Kwun is flooded, the performance of Kwun will be seriously affected, and there is no maintenance value, so the Kwunphi can not provide maintenance service, we will 
provide replacement Kwun service, please note and send it back as appropriate.
※ Kwun Please properly dispose the personalized items and decorations (including but not limited to Kwun decorative stickers, UAS stickers, paint and spray paint, etc.) 
attached to the original Kwun before sending and repairing, the Kwunphi will not be responsible for the damage and loss of the personalized items and decorations.
※ In order to ensure your normal rights and interests, please check whether Kwun is in good condition (whether there is any damage caused by logistics and other 
reasons) when signing for the goods. If Kwun is abnormal, please feedback to us within 7 calendar days from the date of receipt; Otherwise, it will be regarded as your 
default Kwun without damage and normal performance. According to the claim management process of the logistics party, if the goods are damaged due to logistics 
transportation, they should contact the Kwunphi within 24 hours.

10.14 Exclusions and Limitations/

Quality assurance restrictions

This ” Kwun Limited warranty policy”does not cover direct or indirect damage or failure to Kwun caused by normal wear and tear or degradation, abuse, misuse, 
negligence, accident, improper maintenance, operation, storage or transportation, including but not limited to:
× After discovering the quality problem under this ” Kwun Limited warranty policy”, fail to send Kwun to the Kwunphi Service Center or the repair enterprise authorized 
by the Kwunphi, or fail to repair or repair in a manner recommended by the Kwunphi;
× collision, falling and burning accidents caused by non-product quality problems;
× Damage caused by unauthorized modification, dismantling and shell opening guided by unofficial instructions;
× Damage caused by incorrect installation, use and operation not in accordance with instructions;
× In the absence of official instructions, the customer repairs the damaged parts by himself;
× Damage caused by circuit modification guided by unofficial instructions, or improper matching of battery pack and charger;
× Damage caused by all operations not operated in accordance with the product instructions;
× Damage caused by operation in harsh environment, such as wind, rain, sand, etc.;
× Damage caused by operation in case of mutual interference with other wireless devices, such as transmitter, graph signal, Wi-Fi signal interference, etc.;
× Damage caused when working at a face with a deviation beyond the designated inclination Angle;
× Damage caused by forced operation in the case of aging or damage of parts;
× Damage caused by reliability and compatibility problems when used together with third-party components certified by non-weird insects;
× Damage caused by insufficient discharge when the power is low or the battery with quality problems is used;
× Uninterrupted operation of the product;
× Data loss or damage caused by the product;
× Failure or damage caused by any third party products;
× Change or remove the product or component with the identification label.

10.14 Exclusions and Limitations/ 

Other restrictions and exclusions

Apart from the above exclusions and limitations, this ” Kwun Limited warranty policy”does not cover:
The Kwunphi is only liable for loss or damage to the product if: the product is already in Kwunphi possession; Or the product is on the way to be transported by the Kwunphi.
Kwunphi is not responsible for the loss or disclosure of any data contained in the product, including confidential, proprietary or personal information.

37

Содержание Kwun Solarox B30M









































Отзывы: