Kwunphi Kwun Solarox B30M, Руководство пользователя

Страница: 22 / 40

4. Use guide
4.3 How to use this product
4.3.7 Battery replacement
4.3.8 Battery charging
1.Turn off the power and make sure the power is off
2. Unscrew the battery cover retaining bolt and open it
3. Take the battery out
4. Place the spare battery in
5. Close the battery cover and tighten the retaining
bolts
1.Remove the battery and make sure the battery is not in working
condition
2. The outlet of the charger is inserted into the charging port of the battery
(there may be a small spark phenomenon)
3. The input plug of the charger is inserted into the power socket
4. The red light of the charger turns on and the battery begins to charge
5. It takes about 4 hours to fully charge (when the red light of the charger
turns off, the green light turns on, and the charge is finished)
6. After charging, remove the charger input plug from the power outlet
7. Remove the battery from the outlet of the charger and store it
4.3.9 Water cube connection
1.The base of the rotary table of the water cube is embedded in the
installation groove on both sides of the equipment .
2. Install the fixing frame of the nozzle module on the roller brush bracket,
and screw the M3 screw to fix it.
3. Fix the U-groove on the support frame of pipeline by hand screw.
4. Connect the pipe of the nozzle and the rotary table through the quick
connector, and make the pipe pass through the U-groove.
21