KwiKool BioKool KBIO1411, Руководство по эксплуатации

Страница: 11 / 34

Air Chutes
Condensate Water Outlet
Condensate Tank
Your unit may come equipped with air chutes, or you
may have purchased them as an optional accessory.
Install supply air flanges to the front of your KwiKool
unit above the control panel. Step by step instructions
are included with the air chute kit.
Five gallon condensate tank
automatic cutoff float assembly
The Condensate Water Outlet is located in the back of the unit in the cord
compartment. Look for the 1/4” OD barbed fitting. Push to connect the clear
tube to the fitting.
To use the external condensate tank, remove the
factory installed condensate float switch bypass
plug on your KwiKool unit and install the male
connector jack supplied on the condensate tank.
Next connect the factory supplied ¼” ID condensate
tubing to the ¼” OD barbed condensate water outlet
on the back of your KwiKool and connect the
discharge end of the tube to the ¼” barbed connec-
tor on the condensate tank. The condensate float
jack must be inserted into the female condensate
jack to operate your BioKool™. CF displays if the jack
is not connected or the bypass plug is not inserted
properly.
12
ASSEMBLY
KwiKool
®
BioKool™ systems come standard with an external 5-gallon condensate
tank. The tank is equipped with a float switch that shuts your KwiKool down and alerts
operators with an alarm and display, when the condensate tank is full. It will read CF
Condensate Full, on the screen. This prevents accidental water overflow on the floor.
The alarm will clear automatically upon emptying the 5 gallon tank and reconnecting
it. If connecting to a permanent drain, DO NOT connect or use the equipped tank.
The condensate float switch jack either connects to the condensate tank; or
is bypasssed by the factory installed male bypass switch, plug. You will find it
next to the condensate water outlet.