![background image](http://html1.mh-extra.com/html/kvt/fastsetm10/fastsetm10_instruction-manual_2013608030.webp)
EN
Instruction Manual
Hydropneumatic tool for rivet nuts from M3 to M10
with stroke and pressure adjustment
FASTSETM10
www.kvt-fastening.ch
30
6 -
OPERATION
6.1 -
OPERATORS
The tool is designed to be used by one operator only.
Tool operators must satisfy the requirements stated hereafter (or they must be informed and trained accordingly). They
must be aware of the manual herein and of all information relevant to safety:
•
They must have some general and technical education, to a sufficient level to be able to understand the manual and to
interpret the drawings and the diagrams correctly.
•
They must be acquainted with the main hygienic rules, and with the industrial-safety and technological instructions.
•
They must have an overall knowledge of the line and of the factory in which the tool is installed.
•
They must know what todo in case of emergency, where to find the individual protection means and how to use them
correctly.
Together with the above-mentioned requirements, the service technicians must also have an appropriate technical training.