EN
Instruction Manual
Hydropneumatic tool for rivet nuts from M3 to M10
with stroke and pressure adjustment
FASTSETM10
www.kvt-fastening.ch
28
4.2 -
INTENDED USE
he tool is designed exclusively to be used with rivet nuts as described in section 2.1: female type with thread between M3
and M10, and male rivet nuts with thread between M3 and M10.
4.3 -
OPERATING CONTRAINDICATIONS
The tool shall not be used:
•
For purposes different to those listed in previous para 4.2.
•
In explosive or aggressive atmosphere or when there is an excessive amount of dust or oil in the air.
•
In atmosphere subject to the risk of fire.
•
When it is exposed to weather conditions.
4.4 -
RESIDUE RISKS
During the normal working cycle and when servicing the tool, the operators are exposed to some residue risks which, due
to the nature of the operations to be carried out, cannot be totally eliminated.
•
Risk of breakage of the supply hose due to the fact that it contains compressed air. It is therefore absolutely
crucial not to exceed the maximum pressure indicated in the technical data
(see section 2.5).
4.5 -
IDENTIFICATION/SERIAL NUMBER
S
ERIAL NUMBER ETCHED IN THE
OUTER CASING
A
DHESIVE LABEL INDICATING THE TOOL MODEL
,
THE
NAME OF THE
C
OMPANY AND THE
EC
MARKING