KVM-TEC Smartline SVX1 Скачать руководство пользователя страница 4

kvm-tec    |    7

1. introduction

6    |    kvm-tec

1. INTRoDUCTIoN

Congratulations on the purchase of your new Smartline SVX1 KVM Extender. You have bought 

a high quality extender. These instructions are part of this product. They contain important 

information regarding safety, use and disposal for every user of the Smartline SVX1 KVM Extender. 

Please familiarise yourself with the information within prior to using your product. Use the product 
only in the manner as described and for the areas of application as stated. When passing the 
product to a third party be sure to also supply all instructions and other relevant documentation. 

Following proper use and maintenance, your Smartline SVX1 KVM Extender will bring you joy for 

many years to come.

1.1 INTENDED UsE

This product is intended to be used as a device to increase the distance that a keyboard, monitor 
and mouse can be placed from a computer. This product is intended for professional use. The 
product should not be used in potentially explosive environments.

The product may only be used according to the instructions as described in this manual. All use, 

other than that described in this manual, is seen as unintended use. Modifications in the course of 
technological progress are reserved. In these user instructions the Smartline SVX1 KVM Extender 

is referred to as ‘product’ or ‘extender‘. The SVX1/PC is referred to as the ‘local unit / CPU  and the 
SVX1/Monitor is referred to as the ‘remote unit‘/CoN.

1.2 sAFETy INsTRUCTIONs

 

WARNING! Read and understand all safety instructions.

• 

Follow all the instructions. This will avoid accidents, fire, explosions, electric shocks or 
other hazards that may result in damage to property and/or severe or fatal injuries. 

Please ensure that everyone who uses the product has read and followed these warnings 
and instructions.

• 

Keep all safety information and instructions for future reference and pass them on to 

subsequent users of the product. 

• 

The manufacturer is not liable for cases of material damage or personal injury caused 

by incorrect handling or non-compliance with the safety instructions. In such cases, the 
warranty will be voided.

• 

This product is not intended for use by persons (including children) with restricted 

physical, sensory or intellectual capability or lack of experience and/or knowledge, unless 
they are supervised by a person who is responsible for their safety or provides them with 
instructions on how to use the product.

• 

DANGER! Not for use in potentially explosive environments. 

• 

DANGER! Be vigilant at all times, and always take care around this product. Do not use 

electrical equipment if you are lacking in concentration or awareness, or are under the 

influence of drugs, alcohol or medication. Even a moment of inattentiveness can lead to 
serious accidents and injuries when using electrical equipment. Check the product and 

the cables for any damage before use. If there is any visible damage, a strong odour, or 
excessive overheating of components unplug all the connections immediately and stop 
using the product.

• 

If the product is not installed and used in accordance with this manual, it may cause 

disruptive interference with radio or television reception or affect other electronic 
products in residential areas.

• 

Use shielded cables only to connect the components in order to avoid such interference. 

Non-compliance invalidates the permission to operate this product.

• 

Only the mains adapter included with the product should be used as the power supply. 

Do not use other adapters.

• 

Prior to connecting to the mains, make sure your local mains voltage matches the rating 

indicated on the product.

• 

The product must be connected to a permanent and earthed AC wall socket.

• 

Protect cables from being strained, pinched or buckled and place them in a way to 

prevent people from tripping over the cord.

Содержание Smartline SVX1





































Отзывы: