TracVision TV1 User’s Guide
45
Receiver Settings
14.
At the Setup Details screen, select
Continue
.
15.
Allow the receiver to run two additional tests of its landline
connections.
16.
At this point, you may activate the receiver. Call the number
provided in
“Activating Your Receiver(s)” on page 47
. Once
the receiver is activated, the process is complete.
17.
Repeat this procedure for any additional receivers, making
sure you connect each receiver directly to the TV-Hub as
directed in step 2. When you are done, reconnect all system
components as necessary for your chosen configuration.
18.
When you are done running Check Switch tests, proceed to the
next page of the Setup Wizard. Do not close your web browser
window to exit.
Important!
If you accidentally close your web browser window instead of
proceeding to the next page of the Setup Wizard, be sure to set the
Check Switch mode to
Off
at the General Settings page of the web
interface. See
“Check Switch Mode” on page 46
for details.
Содержание TracVision TV1
