TracVision TV1 User’s Guide
41
Receiver Settings
Setting the Dish Type on a DIRECTV Receiver
To work with the TracVision system, the DIRECTV receiver(s) must be
set to the correct dish type for your particular configuration. To set the
dish type, follow these steps:
NOTE: A video tutorial of this procedure is available in
(Internet access required).
1.
Press
MENU
on the receiver’s remote control to access the
onscreen menu.
2.
At the main menu, highlight
Settings & Help
. Then select
Settings
.
3.
Highlight and select
Satellite
.
4.
Highlight and select
Repeat Satellite Setup
.
5.
At the warning message, press the
Dash (-)
button on the
receiver’s remote control.
6.
Set the appropriate dish type for your receiver:
7.
Highlight and select
Continue
to save your changes.
Receiver Type
Dish Type
Switch Type
U.S. SWM
3-LNB
SWM
U.S. Non-SWM and
Latin America
Round
Multiswitch
Содержание TracVision TV1
