Test Result: NONE
If the system tests achieves a result of
NONE
, there is no
communication at all between the antenna unit and the IRD.
Solution
Check to be certain the IRD and TracVision SA are connected
properly at the low-speed data port. Refer to
Section 2.4,
“Connecting the Antenna Unit,”
for correct Antenna Unit to
IRD wiring procedures and diagrams. After verifying the
connection, cycle the power on and off and review the startup
test results.
Test Result: UNKNOWN
In the instance of a result of
UNKNOWN
, a communications link
exists, but the data received by the antenna unit is garbled and
unrecognizable.
Solution
As with a result of
NONE
, first check to be certain the IRD and
TracVision SA are connected properly at the low-speed data port.
Refer to
Section 2.4, “Connecting the Antenna Unit,”
for correct
Antenna Unit to IRD wiring procedures and diagrams. After
verifying the connection, cycle the power on and off and review
the startup test results. If this does not initially succeed, refer to
Section 4.2.2, “AC Power Fluctuating,”
and follow the IRD reset
procedure.
4.2.5 IRD Faulty
In the case of a faulty IRD, refer to your IRD user manual for
service, replacement, and warranty information.
4.3
LNB Faults
Section 5, “Maintenance,”
provides detailed instructions for
authorized service personnel who may be required to replace
the TracVision SA LNB.
4-4
A Guide to TracVision SA
