Configure Longitude of a User-configurable Satellite
Function:
configures one of the user-configurable satellites
with the longitude provided
Command:
SATCONFIG,USERX,YYY,Z,D,L
Response:
If valid pair, echoes the input data
If invalid pair, returns error message
Where:
X = 1 or 2
YYY = longitude (0-180)
Z = E (East) or W (West)
D = decoding type (0=test, 1=DSS-A, 2=DSS-B,
3=DVB)
L = LNB polarization (c=circular, l=linear)
F.7
Debug Commands
Report Offset Angles
Function:
reports system offset angles
Command:
OFFSETS
OFFSETS,XXXXX,YYYY
Response:
Offsets= XXXXX.X XXXXX.X
Where:
X = new azimuth offset (-1800 - 1800)
Y = new elevation angle (-450 - 450)
Applies Default Values to Default Satellites
Function:
updates the default satellites to the default values
Command:
SATPAIR,X
Response:
displays numerous frequency commands and
reports
“
Satellite Installation Complete
”
Where:
X = 0 (satellites default to Astra & Hotbird)
or
X = 1 (satellites default to Expressvu and
EchoStar 119)
or
X = 2 (DSS 101 and DSS 119)
Report Last Satellite Tracked/Update Value
Function:
reports the last satellite tracked or updates the last
tracked satellite to the value input if it is different
from the current value
Command:
LASTSAT
LASTSAT,X
Response:
Last = <sat_name>
Where:
X = A (updates to satellite A)
or
X = B (updates to satellite B)
F-8
A Guide to TracVision L3
Table F-7
Debug Commands
