1.2.2 Integrated Receiver Decoder
The IRD (purchased separately) receives satellite signals from the
Antenna Unit for signal processing and channel selection, and
sends the signals to the TV set for viewing. The IRD also
provides the interface for the user to activate authorization for
reception. Please refer to the User’s Manual provided with your
selected IRD for complete operating instructions.
1.3
Materials Provided with
TracVision L3
Table 1-3 lists the units, cables, and materials packed in the
TracVision L3 package by name and KVH part number.
Component
KVH Part No.
Antenna Unit (comprising):
01-0225-03
Baseplate Assembly
02-1044-01
Radome Assembly
02-0953-03
RF Cable
32-0589-30
Power Cable
32-0590-30
Antenna Data Cable
32-0630-30
PC Cable
32-0628-06
Mounting Plate
20-0668
Kitpack*
72-0101
Installation and Operation Manual
54-0157
IRD Ground Wire
32-0583-30
Switchplate
02-1023
* A complete listing of kitpack contents is provided in
Section 2.2,
“
Mounting the
Antenna Unit.
”
1-4
A Guide to TracVision L3
Table 1-3
TracVision L3 Packing List
Cables for the TracVision L3 are
stored beneath the Antenna Unit
during shipping.
The dual-output LNB in the North
American systems allows two
IRD/TV pairs to be connected
directly to the antenna. Three or
more pairs can be connected to the
system if an active multiswitch is
used.
Section 2.3.6,
“
Connecting
the Antenna RF Signal Cable to the
IRD,
”
provides installation directions
for each of these options.
