system is receiving and decoding the signals
properly. If possible, view both horizontally and
vertically polarized channels.
2. Select several channels from your second active
satellite service to confirm that the system is
receiving and decoding the signals properly. If
possible, view both horizontally and vertically
polarized channels.
Completing the Installation
Once the system has been installed and is operating properly,
replace the radome.
2.7
Configuring TracVision L3 for
Remote Satellite Dish Operation
In some campground locations, dense foliage will block the
satellite signal. In these situations, a remote portable antenna
may be the only solution to satellite signal reception.
The wiring option for the remote dish is very simple and should
be installed when the TracVision L3 is installed. A high-quality
“A/B switch” should be used to change from TracVision L3
dish reception to remote antenna operation. The recommended
wiring arrangement for remote dish operation is illustrated in
Figure 2-23.
2-23
Owner
’
s Manual and Installation/Service Guide
54-0157 Rev. C
If a need does arise to paint the
radome,
ONLY use non-metallic
automotive paint
to avoid
degrading the RF signal strength
and the reception quality.
A
B
A
B
Common
TV Out
SAT in
Figure 2-23
Remote Dish Wiring Configuration
