Select Active Satellite
Function:
switch antenna tracking to/from satellite A and B
Command:
@L,x
Where:
x = A or B (as defined during the SATINSTALL
process)
Set/Report GPS Position
Function:
reports or sets default GPS position
Command:
GPS<cr>
GPS,XX,D,YYY,E
Response:
GPS = XXD YYYE<cr>
GPS: XXD YYYE
Where:
XX = latitude (0-90)
D = S (South) or N (North)
YYY = longitude (0-180)
E = E (East) or W (West)
Report Satellite Names
Function:
report names for satellites A and B
Command:
SATNAMES
Response:
SATNAMES,<sat_a_name>,<sat_b_name>
Report Configured Satellite Names
Function:
report names for all configured satellites
Command:
SATLISTA
Response:
SATLISTA,<sat_name1>,...,<sat_nameX>
Report Valid Satellite B Selections
Function:
report names for all valid satellite B selections for a
given satellite A selection
Command:
SATLISTB,<sat_a_name>
Response:
SATLISTB,<sat_a_name>,<sat_b_name1>
...,<sat_b_nameX>
Install Satellite Pair
Function:
installs satellites A and B as the satellite pair
Command:
SATINSTALL,<sat_a_name>,<sat_b_name>
Response:
If valid pair, echoes the input data
If invalid pair, returns error message
F-7
Maintenance Port Parser Commands
54-0157 Rev. C
Table F-6
Installation Commands
