KVH Industries TracVision HD11, Руководство по установке

Страница: 5 / 39

3
Before you begin, follow these steps to make sure
you have everything you need to complete the
installation.
a. Unpack the box and ensure it contains
everything shown in Figure 1 and on the
Kitpack Contents Lists.
NOTE: A SmartSwitch Service/System Selector is
required for dual-antenna installations, while it is
optional for single-antenna installations. It is referred
to as the “SmartSwitch” throughout this manual.
TIP: If possible, save the crate and packaging for
future use in case you need to ship the system later.
b. Carefully examine all of the supplied parts to
ensure nothing was damaged in shipment.
c. Record the system serial numbers in the
Installation Worksheet (supplied in the
Customer Welcome Kit) (see Figure 2). Refer
to the Installation Worksheet for serial
number locations.
Keep the Installation Worksheet handy to
help you plan the installation and record
important information needed later for
system setup. To enable activation of the
TracVision HD11’s GPRS modem, you will
need to send the completed worksheet to
KVH.
IMPORTANT!
Inspect & Record Parts Information
1
Figure 1 Primary Components
Figure 2 Installation Worksheet
Radome
Antenna
Baseplate
Service
Hatch (x2)
Antenna Control Unit (ACU)
CONTROL UNIT MENU CHANGE ACCEPT EXIT
ANTENNA
POWER
®
T R A C K I N G S A T S
D I R E C T V 9 9 / 1 0 1 / 1 0 3
SmartSwitch Service/System Selector (if equipped)
MULTISWITCH OUT ANTENNA INPUT
POWER PORT/A 3 2 1 STBD/B
®
TracVision ® HD11 Installation Worksheet
Page 1 of 7
54-0829 Rev. A
IMPORTANT! Completed Worksheets Must be Sent to KVH for GPRS Modem Activation!
Complete each page of this installation worksheet to plan and record important information you will need for system
setup. To activate the system’s GPRS modem, send the completed worksheet to KVH. Refer to the TracVision HD11
Installation Guide for complete installation instructions.
Installer, Vessel, and Owner Information
Vessel Information
Date Installed
Vessel Name
Vessel IMO
Installer and Dealer/Ship Builder
State/Province
Address2
Country
Phone
E-mail
Address1
Company Name
Technician Name
E-mail: techs@kvh.com Fax: +1 401 845-8152
Please send completed forms to KVH
Installer’s Notes
Owner Information (if known)
State/Province
Address2
Country
Phone
E-mail
Address1
Owner Name