5-2
A Guide to TracVision Cruiser
Annually
•
Remove the radome and examine the interior of
the Antenna Unit for signs of corrosion, loose
connections, or frayed or broken wires.
•
Clean and wax the radome.
•
Visually inspect the elevation drive shaft
(pictured in Figure 5-2) to be certain that it
moves easily and is clear of grit and debris.
Clean and lubricate as required.
5.3 Replaceable Parts
TracVision Cruiser has been designed with durability and low
maintenance in mind. If you experience an operating problem
or otherwise require technical assistance, contact your local
authorized TracVision Cruiser dealer/installer first. Have the
Antenna Unit serial number ready with a list of the trouble
symptoms. If an authorized dealer/installer is not located
nearby, contact the factory directly at the telephone, facsimile,
or e-mail listings inside the front cover.
Replacement part numbers for units that can be serviced in the
field are listed in Table 5-1.
FRU
Part Number
Baseplate Assembly
02-0952
Radome Assembly
02-0953
Power Cable
32-0590-60
Data Cable
32-0591-60
EchoStar Adapter Unit *
02-0899
CPU PCB
02-0954
RF PCB
02-0826
Antenna Gyro
02-0978
System Fuse
16-0017-4000
LNB
19-0056
* Optional, purchased separately
Table 5-1
Field Replaceable Units
Should the fuse ever need to be
replaced, TracVision Cruiser uses
a 5x20mm, 4-amp, 250-volt fast-
blow fuse.