KVH Industries TracVision A7, Руководство по установке

Страница: 21 / 48

54-0350
2.10
TracVision A7 Installation Guide
Bracket
Plastic Spacer
Rubber Spacer
Mounting Block
Bracket
New Spacer
Flat Washer
Lock Washer
#8-32 Screw
Factory-installed
Spacer
Adding Spacers (If Needed for Extra Height)
Spacer Installation Instructions – If Necessary in Step 5
If spacers are needed to raise the antenna off the
roof, follow the steps below to install a spacer under
each bracket*:
a. Remove the #8-32 x
3
⁄
8
" screws and washers
securing the factory-installed plastic spacer
to the metal bracket.
b. Insert a second spacer from the kitpack
between the original spacer and the bracket.
Secure both spacers to the bracket using the
#8-32 x
7 ⁄
8
" screws supplied in the kitpack
and the original washers that you removed
in Step a.
c. Place a rubber spacer onto the end of each
rubber mounting block.
* Requires Spacers Kit (KVH P/N 72-0221).