KVH Industries TracVision A7, Руководство по установке

Страница: 11 / 48

1-3 Inspect Parts and Get Tools
1. Unpack the box and ensure it contains everything
shown on the antenna and receiver Contents
Lists. Carefully examine all of the supplied parts
to ensure nothing was damaged in shipment.
Save the packaging in case you need to reship the
system.
2. Gather all of the tools and materials listed below.
You will need these items to complete the
installation.
• Hex socket drivers
• Phillips and flat-head
screwdrivers
• Stepladder
• 7 ⁄
16
" open-end wrench
• Torque wrench
• Wire cutters
• Silicone sealant or RTV
• Measuring tape
If you use the roof mount kit:
• Fasteners suitable for attaching the four metal
mounting plates to the vehicle’s roof
• Pencil or scribe
If you route the antenna cable through the roof:
• Light hammer and center punch
• Drill and 5 ⁄
32
" bit
• 1 ⁄
2
" hole saw
If you cut the antenna cable to length:
• LRC/Augat T1000 crimp tool
(KVH P/N 19-0242; call (401) 847-3327 to order)
54-0350
1.6
TracVision A7 Installation Guide