KVH Industries TracVision A7, Руководство по установке

Страница: 18 / 48

6. Secure each mounting bracket to the roof rack
with a retaining plate, two hex socket screws, and
two jam nuts, as shown in the figure. Use a 1
3 ⁄
4
"
screw at the end of each bracket and use a 2"
screw at the base of each bracket.
Be sure to use
the supplied hardware.
After securing all four
brackets to the crossbars, verify that all cushions
(two within each bracket) are pressed firmly
against the crossbars providing a solid grip.
7. Attach a protective cover onto each clamp. The
covers simply snap into place at the sides of the
brackets.
Two different sizes of covers are provided in
the kitpack. Install the two larger covers on the rear
brackets and the smaller covers on the front brackets.
54-0350
2.7
Installing the Antenna
If you installed extra spacers in Step 5, and
the bottom of the antenna still contacts the
roof, KVH recommends that you either use
the roof mount option or replace the roof
rack with an aftermarket model that offers
greater clearance.
Hex Socket Screws
Cover
Roof Rack Crossbar
Retaining Plate
Jam Nuts
Mounting Bracket
2"
1.75"
Securing the Brackets to the Crossbars
Attaching the Cover
Cover
Bracket
Proceed to Section 2-5 on page 2.16.