Kverneland Vicon Andex 724 Скачать руководство пользователя | Manualshive

Страница: 12 / 110

background image

Safety

12

Never work on the machine while it is running

No operations may be performed on the machine while it is running.
Objects or persons can be caught, drawn in or crushed. Serious or
fatal injury may be caused as a result.

Safety distance from raised and unsecured loads

Never work under suspended loads. Maintain a sufficient distance
from raised and unsecured loads. Serious or fatal injury may be
caused as a result.

PTO shaft

Use only the PTO shafts specified by the manufacturer and read the
attached operating manual carefully. Adjust the length of the PTO
shaft as required. Incorrect PTO shaft lengths can cause damage to
the machine and personal injury.

Check and fasten the PTO shaft guard in position

The rotating PTO shaft is protected by the PTO shaft guard. Ensure
that the guard is not damaged. Fasten the PTO shaft guard in position
by connecting the chains on the implement and the tractor. Unguarded
PTO shafts can cause life-threatening injuries.

Make sure the machine is standing level

Before changing from the transport to the work position (and vice
versa), make sure the machine is standing level. The machine could
tip over, particularly on hillside locations. Damage to the machine and
serious or fatal injury may be caused as a result.

Do not make any modifications to the machine

No modifications of any kind may be made to the machine. Unau-
thorised modifications can adversely affect the correct operation and
safety of the machine and shorten its service life. Unauthorised mod-
ifications to the machine render the manufacturer's guarantee null and
void and free the manufacturer from all liability.

«
...
10
11
12
13
14
...
»

Содержание Vicon Andex 724















































































































Отзывы:

Нет отзывов

Похожие инструкции для Vicon Andex 724

Бренд: Taurus Страницы: 28

Бренд: Kärcher Страницы: 54

Бренд: ABB Страницы: 85

Бренд: Latchways Страницы: 80

Бренд: Kapriol Страницы: 28

Бренд: QBC Diagnostics Страницы: 65

Бренд: Hantek Страницы: 124

Бренд: Hameg Страницы: 10

The Wave Transformer

Бренд: EarthQuaker Devices Страницы: 21

Бренд: jablotron Страницы: 2

Бренд: Pari Страницы: 282

Бренд: Samson Страницы: 2

Бренд: Goobay Страницы: 6

Pendalyte 40472U

Бренд: Lightolier Страницы: 3

Бренд: EFX Страницы: 2

Бренд: SAC Страницы: 2

Бренд: Agilent Technologies Страницы: 114

Бренд: Tripp Lite Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды