Kverneland Vicon Andex 724, Руководство по эксплуатации

Страница: 61 / 110

Road transport
61
Attaching the tine
guard
All tine supports which have tips that point at right angles to the
direction of travel and which are at a height of less than 2 metres must
be safeguarded using the tine guards provided.
On each side, the three tine supports whose tines project beyond the
width of the chassis when in the transport position must be covered
(see illustration).
When in the work position, the tine guards are stowed in two holders
to the right and left of the main frame.
The tine guards are placed over the exposed tines and are attached
to the tine support via an elastic rope:

Take the first tine guard from the holder.

Place the tine guard over the tines of the upper tine support, and
attach the elastic rope hooks to the tine support.

Repeat this process for the centre and lower tine supports.

Repeat the entire process for the tine supports on the other side of
the machine.
Exercise caution when near unprotected tines
Maintain a sufficiently safe distance from exposed tines. When
working in the vicinity of the tines, ensure that you have a firm
footing (risk of slipping on wet ground). Otherwise, serious or fatal
injury may be caused as a result.
Position of the tine guards
1
2
3
Tine guard holder
1
2
3