Kverneland Vicon Andex 724 Скачать руководство пользователя

Страница: 96 / 110

Accessories

The following accessories are available for this machine. All
accessories are original parts, and are available from your dealer.

Accessories which are not part of the standard scope of delivery are
indicated by a plus symbol [+] in this manual.

Hydraulic single lift

[+]

The optional hydraulic single lift enables single rotor operation.

The hydraulic single lift must be fitted by an authorised workshop.
Separate assembly instructions are supplied.

Tine saver [+]

If the tines are broken, the tine saver can prevent the broken-off part
from being lost. Any machines following behind, for example straw
cutters, are then not damaged by lost tines in the crop.

For a good swath deposit, both tine legs must run parallel to one an-
other after the tine savers have been fitted.



Fit one tine saver for each tine pair.



Visually check that both tine legs run parallel to each other.

Checking the tine

position

Check the tine position for each tine. If the tine saver is overtightened,
the tine legs become splayed. Proceed as follows:



Check the tine position.



Loosen the screwed connection until both tine legs run parallel.

Tine saver

Tine leg

Breaking
point

Содержание Vicon Andex 724















































































































Результаты поиска

Содержание Vicon Andex 724

Отзывы:

Похожие инструкции для Vicon Andex 724

Бренды по названию

Популярные бренды

Kverneland Vicon Andex 724, Руководство по эксплуатации

Результаты поиска

Содержание Vicon Andex 724

Отзывы:

Похожие инструкции для Vicon Andex 724

Бренды по названию

Популярные бренды