Parking and storage
82
General
The machine must be uncoupled in the reverse order to that in which
it was coupled.
Chapter »Bring the machine into the transport position« page 61.
Chapter»Coupling the machine«, section »Coupling« page 14.
Uncoupling and
securing the machine
To uncouple the machine from the tractor, proceed as follows:
Move the machine into its transport position.
Set the machine down on a firm, level surface and lower it to the
work position.
Secure the tractor against rolling away, shut off the engine and
remove the ignition key.
Secure the machine against rolling away by using chocks.
Pull off the PTO shaft and place it on the holder provided.
Close the ball valve and release the hydraulic couplings.
Place hydraulic couplings in storage pockets.
Remove the tine supports level with the field of vision (2.0 m).
Disconnect the lighting connectors and place them in the storage
pockets.
Lower the sustainer and secure with pins.
Wind the electric cables onto the hook.
Stow the pilotbox securely on the machine.
Lower the lower link until the sustainer rests safely on the ground.
Release the latch between lower link and attachment carrier.
Unhitch the machine.
After the end of
the season
After the end of the season and if the machine is to be stored for a long
period of time, perform the following work:
Clean the machine thoroughly.
Check all the screw joints and tighten the screws.
Repair or replace any damaged components.
Repair any paint damage.
Lubricate the machine in accordance with the lubrication schedule.
Check the tyre pressure.
Replace missing warning signs and stickers.
Storage pockets
Attachment carrier
Sustainer
Содержание Vicon Andex 724
Страница 107: ...EC Conformity Declaration 107 ...
Страница 108: ...EC Conformity Declaration 108 ...
