Getting to know the machine
28
Getting to know the machine
Function
overview
The table below provides a summary of the functions. Be sure to fol-
low the other instructions and note the safety information in the ope-
rating manual.
Steering
Machine position
Function
•
Single-acting hydraulic control
device on the tractor.
Transport
•
Machine in work position.
•
Switch off the PTO shaft drive.
•
Remove outer tine arms for transport.
•
Clean the machine.
•
Use the single-acting hydraulic
control device on the tractor to move
the machine to the transport position.
•
Remove inner tine arms for transport.
•
Single-acting hydraulic control
device on the tractor.
Work position
•
Use the single-acting hydraulic
control device on the tractor to
release the lifting arm locking
mechanism.
•
Pull the cable on the mechanical lock
and keep the cable tensioned.
•
Fold the rotors in fully using the
single-acting hydraulic control device
on the tractor.
•
Single-acting hydraulic control
device on the tractor.
Headlands
•
Using the single-acting hydraulic
control device on the tractor, raise
both rotors to the headland position,
then lower them.
•
Single-acting hydraulic control
device on the tractor.
•
Cable-controlled ball valve for
left rotor.
Swathing with
right rotor [+]
•
Here, the left rotor remains in the
headland position.
•
Raise the machine to the headland
position using the single-acting
control device.
•
Pull the cable on the left cable-
controlled ball valve once.
•
Lower the right rotor using the single-
acting hydraulic control device on the
tractor.
•
Single-acting hydraulic control
device on the tractor.
Lowering the right rotor
•
Remove the left side shaft.
•
Raise the machine to the transport
position using the single-acting
control device.
•
Pull the traction rope on the right
transport lock.
•
Lower the right rotor using the single-
acting hydraulic control device on the
tractor.
