Kverneland Vicon ANDEX 694 EVO Скачать руководство пользователя | Manualshive

Страница: 18 / 93

background image

Safety

18

Operation

Ensure that the machine is in perfect working condition
Do not operate the machine unless it is in perfect working condition.
Check all key components and their correct operation before use. Re-
place defective components. Defective components can cause mate-
rial damage and personal injury.

Check the protective equipment
The protective equipment must not be removed or by-passed. Check
all protective equipment before using the machine. Unprotected ma-
chine parts can cause serious or fatal injury.

Check the immediate vicinity
Check the area immediately surrounding the machine before driving
off, and continually during operation. Make sure that you have an ade-
quate view. Only begin work when the immediate vicinity is clear of
any persons or objects. Otherwise, serious or fatal injury may be
caused as a result.

Retighten all nuts, bolts and screws
Regularly check that nuts and bolts are correctly tightened. Retighten
bolts if necessary. Nuts and bolts can work loose when the machine is
used. Damage to the machine or accidents may be caused as a result.

The PTO continues turning after it has been switched off
After the PTO shaft drive on the tractor has been switched off, the ma-
chine continues to run due to the moment of inertia. Maintain a suffici-
ent safety distance until all moving parts have come to a complete
standstill. Otherwise, damage to the machine and serious or fatal in-
jury may be caused as a result.

Cornering and turning manoeuvres
Centrifugal forces are in operation during cornering. The machine's
centre of gravity at the rear of the tractor is displaced. Be aware of the
turning radius and the moment of inertia. A driving style which is not
adapted to conditions can cause accidents. Accidents with serious or
fatal injuries may be caused as a result.

«
...
16
17
18
19
20
...
»

Содержание Vicon ANDEX 694 EVO






























































































Отзывы:

Нет отзывов

Похожие инструкции для Vicon ANDEX 694 EVO

Бренд: ABB Страницы: 14

Бренд: Odom Страницы: 19

Бренд: MacDon Страницы: 30

Бренд: Raymarine Страницы: 70

Бренд: Harbor Freight Tools Страницы: 4

Бренд: Unex Страницы: 5

Бренд: LAWO Страницы: 459

Бренд: earline Страницы: 13

Бренд: NEILPRYDE Страницы: 55

Бренд: HANYOUNGNUX Страницы: 4

Бренд: Park House Healthcare Страницы: 6

Бренд: J&M Страницы: 33

DISHSTAR ADA-SEER

Бренд: Jackson Страницы: 2

Бренд: M-system Страницы: 5

Бренд: MA Страницы: 2

Бренд: Parker Страницы: 64

Бренд: Parker Страницы: 40

Matrx Digital MDM

Бренд: Parker Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды