Kverneland Vicon ANDEX 694 EVO Скачать руководство пользователя | Manualshive

Страница: 12 / 93

background image

Safety

12

Never work on the machine while it is running
No operations may be performed on the machine while it is running.
Objects or persons can be caught, drawn in or crushed. Serious or fa-
tal injury may be caused as a result.

Safety distance from raised and unsecured loads
Never work under suspended loads. Maintain a sufficient distance
from raised and unsecured loads. Otherwise, serious or fatal injury
may be caused as a result.

Only use the PTO shaft specified
Only use PTO shafts which have been specified by the manufacturer.

•

Read the attached operating manual carefully. Otherwise, damage
to the machine and serious or fatal injury may be caused as a
result.

•

Adjust the length of the PTO shaft, if required. Incorrect PTO shaft
lengths can cause damage to the machine and personal injury.

•

Other PTO shafts with disconnect couplings may allow higher
disconnect torques. Higher disconnect torques may cause
damage to the machine.

Check and fasten the PTO shaft guard in position
The rotating PTO shaft is protected by the PTO shaft guard. Ensure
that the guard is not damaged. Fasten the PTO shaft guard in position
by connecting the chains on the implement and the tractor. Unguarded
PTO shafts can cause life-threatening injuries.

PTO shaft speed 540 rpm
The specified maximum PTO shaft speed of 540 rpm must not be
exceeded. A higher PTO shaft speed will damage the machine.

Make sure the machine is standing level
Before changing from the transport to the work position (and vice
versa), make sure the machine is standing level. The machine could
tip over, particularly on hillside locations. The machine could be dama-
ged and serious or fatal injuries could be caused.

«
...
10
11
12
13
14
...
»

Содержание Vicon ANDEX 694 EVO






























































































Отзывы:

Нет отзывов

Похожие инструкции для Vicon ANDEX 694 EVO

MicroVersaTrip Plus

Бренд: GE Страницы: 20

Бренд: GE Страницы: 252

Бренд: Balanced Body Страницы: 12

Бренд: Eagle Pro Страницы: 6

Бренд: GE Страницы: 10

Бренд: Gardena Страницы: 13

Бренд: Facsimile Страницы: 16

Бренд: XanLite Страницы: 4

The Wave Transformer

Бренд: EarthQuaker Devices Страницы: 21

Бренд: Rapala Страницы: 14

Бренд: S.R.Smith Страницы: 43

Бренд: Lalizas Страницы: 12

BOBCAT 130 Series

Бренд: Balcrank Страницы: 12

Бренд: Park House Healthcare Страницы: 32

Zen-O lite RS-00600

Бренд: GCE Страницы: 20

Бренд: Numark Страницы: 11

Бренд: Eleiko Страницы: 4

Бренд: Heiniger Страницы: 164

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды