Kverneland NGH 301, Инструкция по эксплуатации

Страница: 13 / 41

Hitching the machine
13 13
Hitching the machine
Hitching the machine We strongly recommend that you observe the safety warnings given
in the previous pages of this manual.
The category of the tractor 3-point linkage must match that of the
implement
.
To attach the harrow to the tractor, proceed as follows:
> Line up the tractor with the harrow
> Insert the lower links of the tractor's hydraulic linkage in the corresponding
mounting brackets on the implement, which should both be positioned at
the same distance from the tractor.
> Secure the lower links with the pins and locking pins provided.
NOTE Attachment is made easier if the lower link stabilisers are adjusted so
as to allow the lower links to move freely.
On completion of the hitching operation, the stabilisers should be
adjusted so as to limit oscillation (during implement transport, all
oscillation must be completely eliminated).
> Insert the end of the top link of the tractor's hydraulic linkage in the upper
mounting bracket of the harrow and secure it with the relative pins and
locking pins.
> Adjust the length of the top link, bearing in mind that the drive shaft
transmitting power from the tractor Pto to the harrow must be horizontal
when the implement is in operation.
Mounting bracket
for Cat.2 linkage Mounting bracket
for Cat.2+3 linkage
NGH NGS