Kverneland Electrical Control EC, Руководство по эксплуатации

Страница: 7 / 69

Introduction
Flowmate Control FMC + Electrical Controls EC / GZD-EC
7
H1 INTRODUCTION
Dear Customer
Before using your new Kverneland sprayer for the first time, please make sure that you are fully
familiar by carefully reading these operating Instructions. Please pay particular attention to the
safety instructions.
Careful reading of the operating Instructions will help you handle the machine, prevent failures and
accidents and increase the service life of your machine.
Kverneland cannot accept liability for any damage or operating problems due to failure to observe
the operating instructions.
The compulsory training on handover and the commissioning and initial operation by your
authorised dealer will also help you to familiarise yourself with the machine and enable you to learn
the correct handling procedures.
§1.1 C
OMPLAINTS
The following conditions shall be applicable:
1. Machines, accessories and spare parts must be checked on delivery for any transport damage
and for any missing items. All complaints must be notified immediately.
2. Complaints shall only be taken into account if they are notified immediately in writing, and at the
latest within fourteen days after delivery of the item in question at the customer’s premises.
3. In the event of concealed faults, the written complaint must be submitted on detection of the
fault and at the latest within six months after receipt of the goods. The legal expiry periods
remain unaffected.
§1.2 W
ARRANTY
1. The seller shall make good any problems under warranty by repair or replacement, at the
seller’s own choice. Replaced parts shall become the property of the seller. Failing repair or
replacement, the buyer shall be entitled to demand either reduction of the price or cancellation
of the contract, at the buyer’s own choice.
2. The warranty period for our products is 12 months as from the date of delivery to the end
customer. All wearing parts are excluded from the warranty.
3. The warranty is null and void if
a) The warranty card is not returned to Kverneland duly completed.
b) No warranty shall be accepted for damage due to the following causes:
Unsuitable or inappropriate use, incorrect assembly or operation by the customer or by a
third party, natural wear, incorrect or negligent handling, unsuitable operating substances
and fluids, replacement materials, defective construction works, unsuitable construction
foundation, chemical, electrochemical or electrical influences, provided that they are not due
to the fault of the seller.
4. For essential third party products, the seller’s warranty obligation is limited to transfer of the
claims assigned to the seller against the supplier of the third party product.
5. Warranty claims must be submitted to the customer service of Kverneland warranty application
forms. Claims can only be processed if they are completed in full and submitted at the latest two
months after occurrence of the cause of the claim.