![background image](http://html.mh-extra.com/html/kvaser/pcican/pcican_reference-manual_2012902013.webp)
Kvaser PCIcan Hardware Reference Manual
13(21)
Kvaser AB, Mölndal, Sweden — www.kvaser.com
Figure 4: The CAN buses on the PCIcan-D, -LS2, and
–SWC2. On the –S, LS1, and –
SWC1, the “CAN2” connector is not present.Software Development Information
5.10 Intended Audience
This section is intended for those who want to program the PCIcan card directly. Normally,
you would choose to use the supporting device drivers available for the PCIcan card. Refer to
the “CANLIB Software Development Kit” documentation for further information on these
device drivers from a programmer’s point of view.
5.11 Additional Documentation
This document includes all information you need to use the circuits on the card. However, the
circuits themselves are not described here so information about these must be obtained from
the suppliers. See the list of references on page 18.
General knowledge about the PCI bus is also assumed.