www.kvarta.net
8
/
32
8
DVB Monitor M1 User Manual 2.21
3.
Getting connected
3.1.
Connecting to the embedded web site
1.
Connect the Ethernet cable between the RJ45 and the network.
2.
Open a Web browser (Mozilla, Internet Explorer, …) and enter the monitor’s IP address ( Default:
192.168.2.3)
you just set in the previous step. Log in with the default username and password
(
admin/admin
). The home page of the embedded web site is displayed:
NOTE:
Your computer should have IP address which is in the same network.
3.2.
LED Indication
POWER
– Indicates that power supply is available.
LAN
– Indicates LAN connection ON/OFF (blinking indicates problem with the SD card – plugged out
or can’t read config.ini file properly).
ALARM
- Indicates reception (blinking indicates parameter out of range or bad reception).
3.3.
Back panel
Micro SD – 2GB containing configuration and web site files
LAN – Ethernet connection
IN A – RF input for DVB-S/S2 (F connector)
IN B – RF input for ATV/DVB-C/T/T2 (DIN connector)
IEC Connector – AC Power Supply connection 230V/115V
