www.kvarta.net
14
/
32
14
DVB Monitor M1 User Manual 2.21
4.2.2.
RF Configuration
•
Open the embedded web page and click
CONFIG -> Config
•
Monitoring mode should be ON as it is in the picture below
•
You can add new carriers for each specific standard by selecting the
“+Add new”
button in
the upper right corner of the standard, and type in the exact carrier frequency and then
press
“Add”
•
Connect the RF Antenna or CATV source to IN A or IN B
•
Select the appropriate Input (A or B) used for the type of modulation Analog/DVB-C/DVB-
T/DVB-T2/DVB-S/DVB-S2
•
Configure other relative settings like Bandwidth, Symbol Rate, Constellation and Spectrum,
by pressing the
“Settings”
button, located in the upper left corner, for each corresponding
standard
•
Click the Save button below the settings to store the configuration
