Kval 990-HQ, Руководство по эксплуатации

Страница: 42 / 92

About the Eight Shooter System
2-14
990-HQ Operation Manual
About the Driver Assembly
The Driver Assembly is the work horse of the Eight Shooter. The assembly automatically
receives, aligns, and drives the screws into the door and the jamb.
Air Motor
Gearbox:
Geared to drive 8 screws
simultane-
Chucks X8:
Holds 8 screw bits
aligned to the Door
and the Jamb.
Hinge Applicator:
Location to attach
Hinge
Turret to Adjust Depth:
Adjustable stops to set
the depth of the screw
drivers. Used with the
Forward Limit Switch.
Forward Stop
Limit Switch
*
Reverse Stop Limit on
other side
Plunge Cylinder:
Moves the screw
drivers into place
8 Shooter Assembly
Cylinders (x2):
Moves 8 shooter along
rails to door and
jamb.
Magnets (x4):
Magnets hold
Hinge for
Application.
Screw Receiver
Tubes:
These tubes receive
the screws from the
hopper by way of plas-
tic tubes
Latch Arm:
Latches to H Block to secure in place.
Latch Arm Cylinder:
Moves latch arm in and out
of position
Split Shells X8:
Receives 8 screws,
straightens, and aligns
them.
Stack-Up
Index Spacer
FIGURE 5.
Eight Shooter and Gear Box Call-Outs