Section 7--System Operation
7.5
E. Observe the speed-reading shown in the Eagle II's
TARGET display. It should correspond with B and
D above.
F. If any of the above elements are incompatible, the
reading must be disregarded.
* Use the HOLD feature to defeat radar detectors.
4. If the operator wishes to lock (retain) the violator's
speed, simply depress the LOCK/REL switch on either
the front panel or the remote control. A short alert tone
will be heard and the target speed will be displayed in
the LOCK window.
5. The Eagle II will continue to track the violator's speed in
the TARGET window as long as the vehicle is in the
antenna beam.
6. If the operator switches to the opposite antenna, the
antenna/mode indicator for the selected antenna at the
time of lock will flash and the selected antenna will be
on. If the operator changes back to the original antenna,
the original antenna/mode indicator will light steady.
NOTE: If the auto-unlock feature is enabled, the locked
speed will be automatically unlocked after 14
minutes.
7. To manually unlock or clear the locked speed depress the
LOCK/REL switch. This will clear the LOCK window.
8. If the operator changes the mode of operation, such as
stationary to moving, the locked speed will be
automatically unlocked and cannot be recalled.
