Section 4—Unit Description
4.3
4.1.
Rear Panel
The rear panel of the Eagle II has connectors for two
antennas, remote control (wireless or wired), RS232 I/O
port and Speedometer input cable. In addition, there is a
captive power cord attached to the rear panel.
Located on the left side of the rear panel is a 3.5 mm
connector for the external wired remote control.
Next to the remote control connector is the Speedometer
Input Cable connector. This cable attaches to the vehicle’s
speedometer to assist the DSP to process proper patrol
speed.
PORT 1 will drive a Kustom Signals Giant Display or can
be connected to an Eyewitness
®
in-car video system. This
port provides speed and status information to external
devices.
The power cord is permanently attached to the logic unit. It
supplies power to the system from the patrol vehicle's
cigarette lighter receptacle, auxiliary power receptacle or
portable battery pack. The power input is reverse polarity
protected and protected from over-voltage and over-current
conditions.
