Section 7--System Operation
7.4
NOTE: Some degradation of target capture may be noted
with the filter activated. For maximum
performance, if the patrol vehicle has little or no
fan interference, it is suggested that the fan
interference filter be turned off.
7.2.
Stationary Operation
1. Place the unit in the stationary mode by depressing the
MODE switch and observing that both direction
mode/antenna indicators are lit for stationary operation.
Switch to the desired antenna. Set range to the desired
level. (Level 1, target must be very close before the
Eagle II will display the target's speed, Level 6,
maximum range.) Set fan interference filter to the
desired state (see previous section).
MODE
Select
Stationary
or
FRNT
REAR
Select
Antenna
*2. If desired, turn the transmitter off by depressing either
the front panel or remote control HOLD switch. "Hld"
will be displayed in the TARGET window.
3. Complete a tracking history on the target vehicle.
A. Observe the target and surrounding traffic.
B. Estimate the speed of the target vehicle.
*C. Depress the HOLD switch to turn the transmitter on.
D. Listen to the pitch of the audio; it should correspond
to the estimated speed.
