®
®
between any terminal and earth ground.
Caution
•
No one is allowed to remove the spit case of the Instrument
except professionals.
•
Periodically wipe the case with a damp cloth and detergent do
not use any corrosive solvents.
Note
•
To keep the Instrument in a designed accuracy, it needs warming
up 5 minutes before it is put into operation.
•
If any user requires a higher accuracy of the calibrator, he or she is
requested to make contact with the manufacturer or our product
distributors.
!
!
Section Two Instrument Panel Layout and Functions
03
02
Iustration of LCD Display Area
OUTPUT : Press the key (OUTPUT / IN / SW ) when the symbol
OUTPUT appears. it denotes that the Instrument is in
a state of output.
INPUT : Press the key (OUTPUT / IN / SW) when the symbol
INPUT appears, it denotes that the Instrument is in a
state of input.
CAL : When the symbol CAL appears, denotes that the
Instrument is in a state of calibration.
0 FS : When the symbol ‘O’ OR ‘FS’ appears during the
calibration, it denotes that the zero point or the full scale
point is being calibrated.
+
-
:
When this symbol appears, it denotes that the battery is
nearly used up and needs replacing.
:
When this symbol appears, it denotes that the output digits
need setting