Kusam-meco KM-CAL-805 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 15

Kusam-meco KM-CAL-805 Скачать руководство пользователя страница 15

24

®

®

25

MUMBAI

TEST CERTIFICATE

LOOP CALIBRATOR

This Test Certificate warrantees that the product has been

inspected and tested in accordance with the published

specifications.

The instrument has been calibrated by using equipment

which has already been calibrated to standards traceable

to national standards.

MODEL NO. ________________

KM-CAL 805

SERIAL NO. ___________

DATE: ___________

ISO 9001

REGISTERED

QC

PASS

KUSAM-MECO

WARRANTY

Each “KUSAM-MECO” product is warranted to be free from defects
in  material  and  workmanship  under  normal  use  &  service.    The
warranty period is one year (12 months) and begins from the date of
despatch of goods.  In case any defect occurs in functioning of the
instrument, under proper use, within the warranty period, the same
will be rectified by us free of charges, provided the to and fro freight
charges are borne by you.
This  warranty  extends  only  to  the  original  buyer  or  end-user
customer of a “KUSAM-MECO” authorized dealer.
This warranty does not apply for damaged Ic’s, fuses, burnt PCB's,
disposable  batteries,  carrying  case,  test  leads,  or  to  any  product
which  in  “KUSAM-MECO’s”  opinion,  has  been  misused,  altered,
neglected,  contaminated  or  damaged  by  accident  or  abnormal
conditions of operation or handling.
“KUSAM-MECO” authorized dealer shall extend this warranty on
new and unused products to end-user customers only but have no
authority  to  extend  a  greater  or  different  warranty  on  behalf  of
“KUSAM-MECO”.
“KUSAM-MECO’s” warranty obligation is limited, at option, free of
charge  repair,  or  replacement  of  a  defective  product  which  is
returned to a “KUSAM-MECO” authorized service center within the
warranty period.
THIS WARRANTY IS BUYER’S SOLE AND EXCLUSIVE REMEDY
AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED,  INCLUDING  BUT  NOT  LIMITED  TO  ANY  IMPLIED
WARRANTY  OF  MERCHANTABILITY  OR  FITNESS  FOR  A
PARTICULAR  PURPOSE.    “KUSAM-MECO”  SHALL  NOT  BE
LIABLE  FOR  ANY  SPECIAL,  INDIRECT,  INCIDENTAL  OR
CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS
OF DATA, ARISING FROM ANY CAUSE WHATSOEVER.

«
...
13
14
15

Содержание KM-CAL-805
















Отзывы:

Нет отзывов