®
®
01
WARRANTY
Our company warrants to the original purchase that each product it
manufactures will be free from defects in material and workmanship
under normal use and service for a period of one year from date of
purchase. Our company’s warranty dies not apply to fuses, test leads
or any product which, in our company’s opiron, has been misused,
altered, or damaged by accident or abnormal conditions of operation
or handling.
To obtain warranty warranty service, contact your nearest Service
Center (or send the product, with a description of the difficulty, and
postage prepaid, to the nearest Service Center). Our company
assumes no risk for the damage in transit.
Our Company will,at its option, repair or replace the defective product
free of charge or refund your purchase price.However, if our
company determines that the failure was caused by misuse,
alterations, accident or abnormal condition of operation or handing,
you will be billed for the repair and the repaired product will be
returned to you transportation prepaid,
SHIPPING TO MANUFACTURER FOR REPAIR OR ADJUSTMENT
All shipment of company’s instruments should be madw via United
Parcel Service or”Best Way” prepaid. The instrument should be
shipped in the original carton; or if it is not available, use any suitable
container that is rigid and of adeqate size. If a substitute container is
used, the instrument should be wrapped in paper and surrounded
with at least four inches of excelsior or similar shock-absorbing
material.
TABLE OF CONTENTS
TITLE
PAGE NO.
I. Safaety Information
....................
II. Instrument Panel Layout and Functions..
III. Instrument Maintenance...........................
IV. Power on / off of Instrument....................
V. Output from Instrument...........................
VI.
...........................
VII. Performance Index....................................
VIII. Notice of the Manual................................. 18-23
IX. Warranty..................................................... 25
................
Instrument Measurement
IX. Test certificate............................................ 24
01
2-3
4-5
6-7
8-11
12-15
16-17
Section One Safety Information
To ensure the safety operation, the following signs are used only
as specified in this operation instruction:
Warning
A warming shows that if the operation does not
comply with the following correct instruction is
possible to bring hazards to the user or cause
damage to the instrument in use, The warming
also point out how to avoid the accidents.
Caution
A caution shows that if the operation does not
comply with the following correct instruction, it is
possible to cause damage to the instrument, it is
possible to cause damage to the instrument in
use. The caution also points out how to avoid mal-
operation.
Note
A note serves as a sign to remind the user that
is must understand the correct operation of the
instrument and its characteristics.
To prevent the user and the Instrument from any electric shock
and other hazards, it is necessary to observe the following
regulation.
Warning
•
It is not allowed to operate the Instrument the working field
where there exists flammable gas or explosive gas or vapor,
It is very gangrenous to operate the instrument in such a
surrounding.
!
!
!
!