2
5) Never input signal level exceeding the limit
value to avoid shock or damaging the
instrument.
6) Don’t turn the function / range switch when
taking measurement.
7) The potential difference between the
measurement common terminal COM and earth
should not exceed 1000V to avoid electric
shock.
8) Take extreme care if the tested voltage is over
DC 60V and AC 42V to avoid electric shock.
9) When symbol “ ” occurs on the LCD, it
indicates low battery. Battery should be
replaced to ensure measurement accuracy.
10) Fuse inside must be in a good condition and
they must be replaced, if necessary, with an
indentical model.
!
Caution:
Identifies conditions and actions that
could cause damage or Malfunction
in the instrument.
Warning:
Identifies conditions and actions that
could result in serious injury or
even death to the user.
Terms in this manual
¢
Low power consumption CMOS double
integration, A/D transform integrated circuit,
Auto zero Calibration, Auto polarity display,
Data hold, low battery and Over-range
indication.
¢
DC Basic Accuracy : ±0.05
¢
Capacitance measurement : 0.1~200
m
F
¢
Test lead jack mechanical protection function
and full range over-load protection function.
¢
Auto power off function : The meter will shut off
automatically about 15minutes after power is
on to avoid forgetting to turn off the meter after
using it.
¢
Max reading : 19999(4½)
¢
LCD Display : 70 x 48mm big screen, high
contrast, Word height : 28mm
¢
Power : one 9V battery.
¢
Low battery indication : “ ” will occur on the
left top of the LCD.
¢
Dimension : 192 x 88 x 42mm
¢
Weight : approx 400g (including battery and
holster).
¢
Environmental condition :
o
o
Operation Temperature : 0 C ~ 40 C
Relative Humidity : <85%
o
Storage Temperature : -10 C~50%
Relative humidity : < 85%
3. GENERAL SPECIFICATIONS
3
