®
®
02
WARNING :
To reduce the risk of fire or electric shock, do not expose this product
to rain or moisture. The meter is intended only for indoor use.
To avoid electrical shock hazard, observe the proper safety
precautions when working with voltages above 60 VDC or 30 VAC
rms. These voltage levels pose a potential shock hazard to the user.
Before and after hazardous voltage measurements test the voltage
function on a known source such as line voltage to determine proper
meter functioning.
Keep your hands/fingers behind the hand/finger barriers (of the meter
and the test leads) that indicate the limits of safe access of the hand-
held part during measurement. Inspect test leads, connectors and
probes for damaged insulation or exposed metal before using the
instrument. If any defects are found, replace them immediately. Only
use the test lead provided with the equipment or UL Listed Probe
Assembly rated CAT III 600V or better.
This Clamp-on meter is designed to apply around or remove from
uninsulated hazardous live conductors. But still, individual protective
equipment must be used if hazardous live parts in the installation
where measurement is to be carried out could be accessible.
CAUTION :
Disconnect the test leads from the test points before changing meter
functions.
03
II. INTERNATIONAL ELECTRICAL SYMBOLS :
IV. SPECIAL FEATURES :
1.
2.
3.
4.
5.
6.
7.
TM
Unique AmpTip low-current measurement function.
MAX/MIN/AVG Recording mode (Auto ranging)
Non-Contact EF-Detection (NCV)
Back-lighted easy-to-read LCD display
Fast 80ms Peak-RMS mode to capture in-rush currents
Relative-Zero mode
VFD (Variable Frequency Drive) function.
III. CENELEC Directives :
The instruments conform to CENELEC Low-voltage directive 2006/
95/EC and Electromagnetic compatibility directive 2004/108/EC.
Caution ! Refer to the explanation in this Manual.
Caution ! Risk of electric shock.
Earth (Ground)
Double Insulation or Reinforced insulation
Fuse
AC--Alternating Current
DC--Direct Current
Application around and removal from hazardous live
conductors is permitted.
