Program Edit Mode
The DSP Modulation (DSPMOD) Page
7-39
Each field in the left-hand column of the page is a function-parameter of the current layer’s
algorithm. You can coarsely adjust the function-parameter in these left-hand fields—as noted
in
Common DSP Control Parameters on page 7-33
, any adjustments made to the function-
parameters on the DSPCTL page are reflected in the corresponding function-parameters
on the DSPMOD page. The right-hand side of the DSPCTL page is the subpage of the
highlighted function-parameter—on the subpage are the fine adjust parameters and hard-
wired parameters. To access the parameters on the subpage, highlight the function-parameter
you wish to edit, and then press the > button to move the cursor into the subpage. The label
of a function-parameter depends on its corresponding function-block in the current layer’s
algorithm. The above DSPCTL page corresponds to the following algorithm:
The DSP Modulation (DSPMOD) Page
Before reading further, be sure to read
Control Parameters on page 7-33
.
Press the DSPMOD soft button to call up the DSP Modulation (DSPMOD) page, which is
displayed below:
Parameter
Range of Values
Default
Source 1
Control Source List
Off
Depth
(Depends on Function)
0
Source 2
Control Source List
Off
Depth Control
Control Source List
Off
Minimum Depth
(Depends on Function)
0
Maximum Depth
(Depends on Function)
0
