Main Menu
The battery display is at the top left. After calibration, it
shows the actual battery charge using 16 levels.
In the center, the line voltage is shown in xTU-R mode in the
main menu with a precision of approxi/- 5%. This
tells you if there is any line voltage and its level so that you
can distinguish between an analog and ISDN connection.
This also reveals if the measurement is before or after a
splitter.
The date and time are shown to the right.
Four selection positions are available in the main menu:
1. Broadband
2. Telephony
3. Copper Test
4. Setup
General Operation
In all the menus and submenus that have selection functions, the selectable parameters are either identified
with left and right arrows (◄ and ►) or without arrows. When the entry is marked with the left and right arrows,
you can switch between parameters by pressing the ◄ / ► buttons. When the entry is without the arrows,
press SEL (SELECT) to move to a submenu where you can change settings. Press ESC to exit and save the
selection in the menu. In the main menus, the previously selected menu item is saved. The next time you turn
on the device, the scrollbar is automatically set to the previously selected item.
Markings
disabled
activated, all inputs in order
> test possible
Red bar:
Input / verification
required!
< >
< >
< >
< >
?
!
activated, complement inputs
> test possible
activated, correct entries
> test not possible
Operating Manual
KE3600
xDSL
M
ULTI
T
EST
9
KURTH ELECTRONIC www.kurthelectronic.de [email protected]
Broadband
Help
Date / Time
Main Menu
a/b: 0,0 V
1
Telephony
Copper Test
Setup
2
3
4
Display Line voltage
Help
Date / Time
VoIP Parameters
a/b: 0,0 V
Caller ID
3
<Aus>
Authentication
1
Password
2
p
q
UDP/RTP Port
UDP/RTP Port Range
6
7
<0>
User Agent
5
<5.060>
Registrar
Proxy
9
0
<Off>
Stun Server
8
<Off>
<Off>
Domain
4
